——用于液體采樣的小口瓶
?透明或茶色可選
?聚丙烯不開孔蓋帶有0.015"厚度的PTFE內襯墊
?嚴格程序清洗保證符合或超過EPA標準對于金屬、農藥和半揮發性物質的指標
?對于光敏感方面的應用可以選擇茶色玻璃瓶

L1級：經過完整的EPA*處理，容器經過EPA要求的清洗程序處理并且經受嚴格的質控分析，可溯源。

產品型號：Boston窄口螺紋口瓶
廠商性質：經銷商
更新時間：2023-09-12
訪問量：2270

立即咨詢

產品詳情

#112-01A，1L（32oz）茶色小口BOSTON瓶，33-430螺紋口，PK12
L1級：經過完整的EPA*處理，容器經過EPA要求的清洗程序處理并且經受嚴格的質控分析，可溯源。

——用于液體采樣的小口瓶

Ø 透明或茶色可選

Ø 聚丙烯不開孔蓋帶有0.015"厚度的PTFE內襯墊

Ø 嚴格程序清洗保證符合或超過EPA標準對于金屬、農藥和半揮發性物質的指標

Ø 對于光敏感方面的應用可以選擇茶色玻璃瓶

EP Scientific Products介紹

Products for Environmental Sampling 用于環境分析采樣的產品

Process Clean Sample Containers and Accessories for Environmental Sampling Application經過清潔處理的容器和附件，用于環境分析取樣

Recognized for Two Decades as the Standard of Service and Integrity for Clean Sample Containers in Every Environment 在環境分析方面，經過20多年的驗證，作為行業中服務和可靠性的標準

EP Scientific Standard Glassware and plasticware are processed by one of four methods:

Procedure A: This procedure is designed for clear and amber glass of 60 mL size and larger. The Level 1 （L1） containers are certified to meet or exceed EPA standards for metals, pesticides, and semi-volatiles.書面證明該產品適合或者超出EPA標準對于金屬分析、農藥殺蟲劑和半揮發性物質檢測的要求

Procedure B: This procedure is designed for 40 mL borosilicate glass vials and a select number of larger bottles. The Level 1 （L1） containers are certified to meet or exceed EPA standards for volatiles. L1級產品具有書面證明該產品適合或者超出EPA標準對于揮發性物質檢測的要求

Procedure C: This procedure is designed for HDPE sampling containers. The Level 1 （L1） containers are certified to meet or exceed EPA standards for metals, cyanide and fluoride. L1級產品具有書面證明該產品適合或者超出EPA標準對于金屬分析、氰化物和氟化物檢測的要求

Procedure D: This procedure is designed for LDPE Cubitainers. The Level 1 （L1） containers are certified to meet or exceed EPA standards for conductivity. L1級產品具有書面證明該產品適合或者超出EPA標準對于電導率檢測的要求

EP Scientific standard glassware and plasticware are available with or without certificates of analysis:

Level 1 （CAT # L1）:

Level 1 Certified glassware and plasticware receive full EPA quality assurance treatment. Containers are processed according to EPA recommended wash procedures and undergo strict quality control analysis.

Each case of containers is then custody sealed. Chain of custody is intact right from the start. Each container is lot number labeled for traceability to the enclosed Certificate of Analysis. Custody seals are available in various sizes.

經過完整的EPA*處理，容器經過EPA要求的清洗程序處理并且經受嚴格的質控分析，可溯源。

Level 3 （CAT # L3）:

Containers do not receive an EPA washing treatment and are ready for your own cleaning procedure.

Containers are assembled and meet EPA recommended guidelines for sample container material component specifications

在線咨詢